Tento web používá k poskytování služeb, personalizaci reklam a analýze návštěvnosti soubory cookie. Používáním tohoto webu s tím souhlasíte.

+420 596 624 831

esos@esosostrava.cz

EN   CS

VIBRODIAGNOSTICS

Vibrodiagnostic measurement is used to monitor the condition of bearings, lubrication and detect the dynamic state of rotating machines and machinery. We locate the fault and determine the current state as well as the development in the trend. It is a non-disassembly diagnostics without the need to weigh the machinery and also without stopping production. The reliability and service life of the machines are increased and also the costs of preventive maintenance are reduced.

Most common detectable failures causing vibrations are:

Unbalance of rotors

Abaxiality of couplings, bearings and gears

Mechanical relaxation

Damaged anti-friction bearing

Gears deterioration

Galling

Hydraulic and aerodynamic problems

Electrical malfunctions

Resonance

Deformations

ESOS Vibrodiagnostika

We offer:

periodical measurement of processing machinery and tools, monitoring of bearing condition and detection of dynamic states such as unbalance, abaxiality etc.

non-periodical measurement of problematic processing machinery

implementation of vibrodiagnostics into maintenance system

technical helpdesk, training

On-line measurement, including measurement of temperatures and possibly other quantities in cases where the failure of these machines is irreplaceable for the company.
Periodic and on-line measurement informs in advance about emerging problems with the machine or equipment and allows you to prepare for downtime and repair, or perform service intervention, so that the machine is again operational and reliable.

The measurement also makes it possible to extend the intervals of preventive repairs and replacements of machines and equipment, such as compressors, gearboxes, turbines, spindles, blowers, vacuum pumps,….

During the vibrodiagnostic measurement, we also check the condition of the device visually, ie: loose anchor bolts, condition of the belts, torn silenblocks, clogged el. Grids. engines, lubricant leaks… and we will immediately notify the customer of these facts and take them into account in the evaluation.

Using vibrodiagnostic measurement, we also check the condition of bearing relubrication on site. If relubrication is necessary, the bearing is replaced and the operating condition of the bearing is checked again.
Industrial positioning on the couplings of individual parts of machinery and the whole
Implementation of vibration diagnostics into the system of preventive care
Consulting, technical assistance, training of all manufacturers of diagnostic devices

You can download
Application brochure - vibrodiagnostics

Vibrodiagnostics

Vibrodiagnostic measurement is used to monitor the condition of bearings, lubrication and detect the dynamic state of rotating machines and machinery.

We locate the fault and determine the current state as well as the development in the trend. It is a non-disassembly diagnostics without the need to weigh the machinery and also without stopping production.

Tribodiagnostics

Tribodiagnostics is analyzes of oils, lubricant fuels and emulsions, are used to determine the condition of the oil in terms of its lubricity and machine wear.

We locate the fault and determine the current state as well as the development in the trend. It is a non-disassembly diagnostics without the need to weigh the machinery and also without stopping production. The reliability and service life of the machines are increased and also the costs of preventive maintenance are reduced.

Termodiagnostics

Thermodiagnostic measurement is a non-contact temperature measurement. Can be used wherever the diagnosed parameter is heat radiation. It is widely used in a variety of areas both in industry and in the private sector.

We use a modern thermal imaging system that can cover the entire temperature spectrum and the output thermograph with the necessary accuracy to find possible faults, which when properly evaluated is the basic formula for effective design of technical solutions and subsequently for checking its implementation.

Diagnostics of hydraulic machines and equipment

Diagnostics of hydraulic systems and equipment is used to determine the status of the performance of hydraulic pumps, elements, proportional and hydraulic valves…

Diagnosis is part of preventive and predictive inspections of machines and equipment and, if necessary, to identify problems with hydraulic circuits. The correct operation of the hydraulic equipment will ensure the quality of production.

logofooter

Contacts

Výstavní 3224/51
Ostrava - Moravská Ostrava
702 00
+420 596 624 831-3
esos@esosostrava.cz

About company

IČO: 258 68 781
DIČ: CZ 258 68 781
Contact information